DS-3E1528HP-SI-24P2T2F

Name: DS-3E1528HP-SI-24P2T2F
Brand: Hikvision
SKU: DS-3E1528HP-SI-24P2T2F
Price: 4002803 UZS
Availability: InStock
Rating: 5.0 (1 reviews)

Model: DS-3E1528HP-SI-24P2T2F

★ ★ ★ ★ ★

1 review

4,002,803 sum

In stock

24 Port Gigabit Smart POE Switch

Request price

Hikvision DS-3E1528HP-SI-24P2T2F — a 24-port gigabit managed (Smart) PoE switch. The first 4 ports are Hi-PoE (IEEE 802.3bt) and deliver up to 90 W each. Designed for connecting many cameras to a single device at large sites.

Key features:
• 24 × 10/100/1000 Mbps PoE ports, 2 × gigabit RJ45 and 2 × SFP uplink ports
• Total PoE budget: 370 W
• Maximum power per port: ports 1–4 90 W, ports 5–24 30 W
• Long-range transmission: up to 300 m
• PoE Watchdog — automatically restarts an unresponsive camera
• VLAN 802.1Q, QoS, ACL, SNMP, DHCP Snooping, STP/RSTP, storm control
• Surge protection: 6 kV
• Metal housing, desktop or rack mounting

Suitable for networks in large offices, warehouses and shopping centers.

Official datasheet (PDF)

General
Shell	Metal material
Net Weight	2.975 kg (6.56 lb)
Gross Weight	3.535 kg (7.79 lb)
Power Supply	100-240V~ 50/60Hz 6.3 A
Surge Protection	6 kV
Installation Mode	Desk-Mounted,Rack (equipped with mounting ears)
Relative Humidity	5% to 95% (no condensation)
Operating Humidity	5% to 95% (no condensation)
Storage Temperature	-40 °C to 85 °C (-40 °F to 185 °F)
Operating Temperature	0 °C to 45 °C (0 °F to 113 °F)
Max. Power Consumption	400 W
Dimensions (W × H × D)	440 mm × 44 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'')
Power Consumption in Idle	30 W
Approval
EMC	CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
Safety	CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry	CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
PoE Power Supply
PoE Port	Hi-PoE: Ports 1 to 4 PoE: Ports 5 to 24
PoE Standard	Ports 1 to 4: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 5 to 24: IEEE 802.3af, IEEE 802.3at
Perpetual PoE	Supported PoE remains active during system reboot, except in cases of power outage or PSE firmware upgrade.
PoE Power Pin	Ports 1 to 4: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) Ports 5 to 24: End-span: 1/2(-), 3/6(+)
Max. Port Power	Ports 1 to 4: 90 W Ports 5 to 24: 30 W
PoE Power Budget	370 W
Software Function
ACL	Support ACL definitions based on source/destination MAC address, source/destination IP address, IP protocol type. Support ACL application on ports. Support IPv4 ACL and MAC ACL configurations. Support inbound ACLs.
HPP	Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
QoS	QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
IPSG	IPSG can control the security of port access device. Support port, MAC, IP binding. Support 256 security entries.
VLAN	VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
Long Range	Ports 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.
PoE Watchdog	Ports 1 to 24: auto detect and restart the cameras that do not respond.
DHCP Snooping	DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
Storm Control	Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
Port Isolation	Ports 1 to 28: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
Loop Prevention	Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP.
Link Aggregation	Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
Port Rate-Limiting	Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
System Maintenance	Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
Network Parameters
Ports	24 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
Internal Cache	4.1 Mbits
MAC Address Table	8 K
Switching Capacity	Whole-Device Performance: 56 Gbps Port Performance: 56 Gbps
Packet Forwarding Rate	Whole-Device Performance: 41.66 Mpps Port Performance: 41.66 Mpps

5.0

1 reviews

5 ★

4 ★

3 ★

2 ★

1 ★

Mijoz

02.07.2026

Sifatli mahsulot, tavsiya qilaman!

Leave a review

Rate it *

Your name *

Your review *