DS-3E1520P-EI/M

Name: DS-3E1520P-EI/M
Brand: Hikvision
SKU: DS-3E1520P-EI/M
Price: 1642326 UZS
Availability: InStock

Model: DS-3E1520P-EI/M

★ ★ ★ ★ ★

0 review

1,824,807 sum -10%

1,642,326 sum

In stock

16 Port Gigabit Smart POE Switch

Request price

Hikvision DS-3E1520P-EI/M — a 16-port gigabit managed (Smart) PoE switch. It both connects IP cameras to the network and powers them over a single cable. Remote management is available via Hik-Partner Pro.

Key features:
• 16 × gigabit PoE RJ45 ports, 2 × gigabit RJ45 and 2 × gigabit optical (SFP) ports
• Total PoE budget: 125 W, up to 30 W per port
• PoE standard: IEEE 802.3af/at
• Long-range transmission: up to 300 m
• PoE Watchdog — automatically restarts an unresponsive camera
• VLAN 802.1Q, QoS, DHCP Snooping, port isolation, loop protection, Link Aggregation
• Surge protection: 6 kV
• Metal housing, desktop or rack mounting

Official datasheet (PDF)

General
Shell	Metal material
Net Weight	3.1 kg (6.8 lb)
Gross Weight	2.4 kg (5.3 lb)
Power Supply	100-240 VAC, 50/60 Hz, Max. 2.5 A
Surge Protection	6 kV
Installation Mode	Desk-Mounted,Rack (equipped with mounting ears)
Relative Humidity	5% to 95% (no condensation)
Operating Humidity	5% to 95% (no condensation)
Storage Temperature	-40 °C to 85 °C (-40 °F to 185 °F)
Operating Temperature	0 °C to 45 °C (32 °F to 113 °F)
Max. Power Consumption	150 W
Dimensions (W × H × D)	440.0 mm × 44.0 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'')
Power Consumption in Idle	20 W
Approval
EMC	CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Safety	UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
Chemistry	CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
PoE Power Supply
PoE Port	PoE: Ports 1 to 16
PoE Standard	IEEE 802.3af,IEEE 802.3at
Perpetual PoE	Supported PoE remains active during system reboot, except in cases of power outage or PSE firmware upgrade.
PoE Power Pin	End-span: 1/2(-), 3/6(+)
Max. Port Power	30 W
PoE Power Budget	125 W
Software Function
HPP	Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
QoS	QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP and WRR priority scheduling modes. Support DSCP-based QoS policy.
VLAN	VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 1024 VLAN.
Long Range	Ports 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.
PoE Watchdog	Ports 1 to 16: Auto detect and restart the cameras that do not respond.
DHCP Snooping	DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
Port Isolation	Ports 1 to 20: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
Loop Prevention	Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP.
Link Aggregation	Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation group(s).
System Maintenance	Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
DDM (Digital Diagnostic Monitoring)	Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power.
Network Parameters
Ports	16 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
Internal Cache	8.4 Mbits
MAC Address Table	16 K
Switching Capacity	68 Gbps
Packet Forwarding Rate	50.59 Mpps

0 reviews

5 ★

4 ★

3 ★

2 ★

1 ★

No reviews yet. Be the first to leave a review!

Leave a review

Rate it *

Your name *

Your review *