| General |
| Shell |
Metal material, IP40 |
| Net Weight |
0.550 kg (1.21 lb) |
| Gross Weight |
0.950 kg (2.09 lb) |
| Power Supply |
54 VDC, 2.22 A |
| Surge Protection |
6 KV |
| Installation Mode |
Desk-Mounted,Wall-Mounted |
| Relative Humidity |
5% to 95% (no condensation) |
| Operating Humidity |
5% to 95% (no condensation) |
| Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
| Operating Temperature |
0 °C to 40 °C (0 °F to 104 °F) |
| Max. Power Consumption |
120 W |
| Dimensions (W × H × D) |
217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06") |
| Power Consumption in Idle |
4 W |
| Approval |
| EMC |
FCC (47 CFR Part 15, Subpart B);
CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017);
IC (ICES-003: Issue 6);
RCM (ASNZS CISPR 32: 2015) |
| Safety |
UL (UL 60950-1);
CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);
CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017) |
| Chemistry |
CE-RoHS (201165EU);
WEEE (201219EU);
Reach (Regulation (EC) No.19072006) |
| PoE Power Supply |
| PoE Port |
Hi-PoE: Ports 1 to 2,PoE: Ports 3 to 8 |
| PoE Standard |
IEEE 802.3af,IEEE 802.3at,IEEE 802.3bt |
| PoE Power Pin |
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| Max. Port Power |
Port 1 to 2:90 W Ports 3 to 8:30 W |
| PoE Power Budget |
110 W |
| Software Function |
| HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device. |
| Long Range |
Ports 1 to 8: up to 300 m.
Long range performance may vary depend on camera model or cable condition. |
| PoE Watchdog |
Ports 1 to 8: auto detect and restart the cameras that do not respond. |
| System Maintenance |
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Supports 802.1ab LLDP for peer device discovery.
Support SNMP v1/v2c for third-party management platform access.
Support port mirroring for fault locating. |
| Network Parameters |
| Ports |
8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port |
| Internal Cache |
4 Mbits |
| MAC Address Table |
16 K |
| Switching Capacity |
9.2 Gbps |
| Packet Forwarding Rate |
6.84 Mpps |