| Audio |
| Rated Power |
1000 W |
| THD and SNR |
THD: <0.5%@1 kHz,1/3 rated power
SNR: >90 dB |
| Frequency Response |
100 V COM/70 V COM: 50~20000 Hz(±3 dB)
RCA Out/3.5 mm out: 50~20000 Hz(±1 dB) |
| General |
| Color |
Black |
| Power |
100 to 240 VAC |
| Material |
Front panel: PC+ABS, top and bottom covers: SGCC |
| Bluetooth |
Bluetooth 5.0,10 m |
| Dimension |
495.97 mm × 90.89 mm × 473.18 mm (19.53" × 3.58" × 18.63") |
| Environment |
This device can only be safely used in the region below 2,000 meters above the sea level |
| Packing List |
Device × 1
Power Cord × 1
Regulatory Compliance and Safety Information × 1 |
| Package Dimension |
595 mm × 553 mm × 175 mm (23.43" × 21.77" × 6.89") |
| Power Consumption |
Standby Consumption: 80 W
Annual Average Consumption: Max. Working Consumption: 200 W (based on the average playing time) |
| Operating Humidity |
<90% (No condensation) |
| With Package Weight |
≈ 7.6 kg (16.76 lb.) |
| Operating Temperature |
-10 °C to 50 °C (-14 °F to 122 °F ) |
| Network |
| Network Protocol |
IPv4, HTTP, HTTPS , SSL/TLS , DNS, NTP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SSH |
| Interface Protocol (API) |
ISAPI, ISUP, RTP |
| Function |
| Audio Bit Rate |
G.711ulaw(64 Kbps)/G.711alaw(64 Kbps)/MP3(128 Kbps)/AAC(128 Kbps) |
| Protection Function |
short circuit protection, overcurrent protection, over temperature protection, anti-static electricity protection, surge protection, electrical shock protection |
| Protocol |
| Network Protocol |
IPv4, HTTP, HTTPS, SIP, SSL/TLS, DNS, NTP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SSH, NTP, RTP |
| Interface Protocol |
ISAPI, ISUP, SIP |
| Interface |
| USB |
USB 2.0. File format: FAT32 and EXFAT, maximum capacity: 256 GB.
FAT32 formatted USB drive: maximum capacity of a single partition is 32 GB
EXFAT formatted USB drive: Maximum capacity of a single partition is 256 GB |
| Alarm |
1 EVAC alarm input
1 alarm input
1 alarm output, when the output device connected to the alarm output is normally closed, connect: 1A GND; when the output device connected to the alarm output is normally open, connect: 1B GND. |
| Audio In |
MIC 1~4: -28 dBV, 4.7 kΩ, unbalance, 6.35 mm jack
RCA in 1~4: 0 dBV, 4.7 kΩ, unbalance, RCA pin jack
USB 2.0 × 1
Bluetooth
Note: The 6.35 mm jack cannot be wired without connecting a microphone. |
| Audio Out |
Constant Voltage Output × 4: 100 V COM & 70 V COM. A single channel supports up to 250 W output.
RCA out 1-2: 0 dBV, unbalance, RCA pin jack
3.5 mm out 1-2: 0 dBV, unbalance, 3.5 mm jack
Note:If the constant voltage gear is set to 100 V, the constant voltage output interface(100 V) should be connected to a speaker rated at a voltage of 100 V. Connecting to a speaker rated at a voltage of 70 V could damage the device. |
| Volume Knob |
Total Volume Knob × 1,
MIC Input Volume Knob × 4,
RCA Input Volume Knob × 4,
Output Channel Volume Knob × 4,
Treble Volume Knob × 1,
Bass Volume Knob × 1 |
| LED Indicator |
Power Indicator (solid white): the device is normal working.
USB flash drive indicator (solid white): the device is in USB flash drive mode.
Bluetooth Indicator (solid blue): the device is in Bluetooth mode
EVAC Alarm Indicator (solid red): the EVAC alarm has been triggered.
MIC1 Indicator (solid white): the MIC1 audio input is connected normally.
Module Indicator: FLT solid indicates overload or other system faults; CLIP solid indicates clipping or other exceptions; SIG solid indicates normal working. |
| Local Storage |
Built-in 4 GB EMMC (Audio file storage is 1 GB.) |
| Ethernet Interface |
1 RJ45 10 M/100 M/1000 M adaptive Ethernet port |